The Ten Bronze Stands

In addition, he made ten movable stands of bronze, each four cubits long, four cubits wide, and three cubits high.[fn]

28 

This was the design of the stands: They had side panels attached to uprights, 29 and on the panels between the uprights were lions, oxen, and cherubim. On the uprights was a pedestal above, and below the lions and oxen were wreaths of beveled work.

30 

Each stand had four bronze wheels with bronze axles and a basin resting on four vvv supports, with wreaths at each side. 31 The opening [to each stand] inside the crown at the top [was] one cubit [deep],[fn] with a round opening like the design of a pedestal, a cubit and a half [wide] And around its opening [were] engravings, but the panels [of the stands] were square, not round.

32 

There were four wheels under the panels, and the axles of the wheels were attached to the stand; each wheel [was] a cubit and a half in diameter. 33 The wheels were made like chariot wheels; their axles, rims, spokes, and hubs were all of cast metal.

34 

Each stand had four handles, [one for each] corner, projecting from the stand. 35 At the top of each stand [was] a circular band half a cubit high.[fn] The supports and panels were cast as a unit with the top of the stand.

36 

He engraved cherubim, lions, and palm trees on the surfaces of the supports and panels, wherever each had space, with wreaths all around. 37 In this way he made the ten stands, each with the same casting, dimensions, and shape.

38